Blue screen is one of the common problems in Windows 7 you might have faced. It occurs suddenly with a bundle of text on a blue background, leaving you blank. This problem became so common in Windows 7 that it got the nickname BSOD - Blue Screen of Death. This Windows 7 blue screen might annoy you when you perform important tasks. It breaks the workflow and can harm your computer as well. If you are annoyed and wondering how do I fix blue screen Windows 7, we have discussed some of the best solutions below in detail.
What Is Windows 7 Blue Screen?
Windows 7 blue screen is a common problem that pops up, showing the text “A problem has been detected and windows have been shut down to prevent damage to your computer.”and showing collecting data from crah dump. This problem occurs when the Windows data gets corrupted, lost, or hardware fails.
Windows 7 blue screen on startup loop is also one of the issues you might face and its major causes are software updates, Windows updates, or recent hardware installation. Also, bad-quality software execution is a cause of the Windows 7 blue screen crash dump.
Some Common Windows 7 Blue Screen Type
The Windows 7 blue screen error causes the system to restart or shut down unexpectedly. When the system fails to identify the booting files, it shows a blue screen in Windows 7. 0x0000007B (INACCESSIBLE BOOT DEVICE) and 0x00000024 (NTFS FILE SYSTEM) are two of the common blue screen error you might face. The corrupted data on the hard disk drive causes 0x0000007B (INACCESSIBLE BOOT DEVICE) and 0x00000024 (NTFS FILE SYSTEM).
Let’s have a look at the list of some common Windows 7 blue screen types.
0x000000ED (UNMOUNTABLE BOOT VOLUME)
0x0000007B (INACCESSIBLE BOOT DEVICE)
0x00000024 (NTFS FILE SYSTEM)
0x0000007E (SYSTEM THREAD EXCEPTION NOT HANDLED)
0x0000008E (KERNEL MODE EXCEPTION NOT HANDLED)
0x00000050 (PAGE FAULT IN NONPAGED AREA)
0x000000D1 (DRIVER IRQL NOT LESS THAN OR EQUAL TO)
0x000000EA (THREAD STUCK IN DEVICE DRIVER)
How to Fix Blue Screen Windows 7--The Easiest SolutionProven
Try PassFab FixUWin's smart repair if you're looking for efficient solutions. This is one of the best options for resolving the blue screen of death in Windows 7 PassFab FixUWin’s extensive feature set and functions are enough to diagnose and fix windows 7 blue screen.
- Fixes available for over 200 Windows issues, such as the blue/black screen, Windows failure to start, computer crashes, etc.
- Easy-to-use UI.
- Secure, and you won't even have to reinstall your software or worry about your data getting leaked.
- Compatible with Windows 11/10/8.1/8/7 and supports all brand computers.
- Insert an USB/DVD/CD drive after downloading the software from any accessible PC.
- Click Create boot disk now to create a bootbale media.
- Switch to the problematic PC and plug the bootable USB/DVD/CD drive into it.
- Press Boot key continuously to enter into the boot menu and choose the USB/DVD/CD drive you insert.
- Click Smart System Repair to start repairing. The software will dignoise the problems and fix it aotomatically.
- Click Restart to reboot the computer. You will not see Windows 7 blue screen crash dump error on your PC.
How Do I Fix Blue Screen Windows 7 If You Can Enter Into Operating System
Solution 1. Fix Windows 7 Blue Screen In Safe Mode
You should enter Safe Mode if Windows isn't starting up properly. From there, you may carry out the steps to launching Windows 7 in Safe Mode.
- Restart your PC.And press F8 just before the Windows logo shows.
- Select Safe Mode using the arrow keys from the menu and Press Enter.
- Right-Click on My Computer and select Properties to go to Advanced Tab.
- Click the Settings option in the Startup and Recovery section.
- Uncheck the box for the Automatic Restart option under the System Failure section.
Solution 2: Fix Windows 7 Blue Screen Using Command Prompt
Using a command prompt is also an effective solution to fix Windows 7 blue screen errors. Below are the instructions to follow for fixing it.
A. Perform sfc Scan
SFC is a built in Windows tool embedded in every Windows version. This tool is helpful in enabling you to repair the Window’s corrupt system files.
- Open Command Prompt as an admin.
- Enter the command: sfc / scannow and hit Enter.
Once you run System File Checker, it will automatically search for and attempt to restore the corrupted system file. After the computer repair procedure is complete, it requires a restart.
B. Perform chkdsk Scan
The CHKDSK command investigates a drive volume for any logical or physical problems that may exist in the file system and the metadata.The operating process is similar as performing sfc scanning but type chkdsk /f /r C: (Replace C: with your drive letter) to the command prompt.
C. Perform DISM Scan
DISM is also a Windows built in tool that enables you to repair or fix any corrupt or damaged files on your system. It checks the entire disk for the corrupt files and fix them.
- Run Command Prompt as an admin.
- Enter the following command: DISM.exe /Online /Clean-up image /scanhealth and Enter.
- Let it search for any corrupt files. After the search completes, enter the next command: DISM.exe /Online /Clean-up image /restorehealth and press Enter.
Solution 3: Perform Startup Repair
One of the best methods to fix a blue screen is to use startup repair. You will need to boot from Windows 7 installation disk to perform the startup fix. Instructions are as follows.
- Insert the Windows installation disc, hit F12, and let the computer start up from the disc.
- After selecting the language and region, click the "Repair your Computer" button.
- Choose "Repair Startup" from the menu.
- The scanning process to identify and fix the issue with your computer will begin immediately.
Solution 4: Install Latest Drivers
Check to ensure that all of the device drivers on your system are updated to the most recent version. Check the driver's most recent version by going to the manufacturer's website for your machine.
An incompatible device driver is likely the root cause of most blue screen issues. You might try restarting your computer after deleting any newly installed device drivers and see if it helps.
Solution 5: Perform System Restore
There might be some corrupted files or settings on your system that are causing the BSOD errors that you are experiencing. (You can restore your operating system to your generated backup.)
- Insert the Windows DVD/CD/USB into the drive. Then, use it to start your computer.
- Select the language and area, and then click Repair Your Computer.
- To use, go to your computer's settings and choose System Restore.
- To complete the restoration, just follow the on-screen prompts.
Solution 6: Fix MBR
The Master Boot Record (MBR) is the disk part containing the information necessary to boot into your operating system. If this data becomes corrupted, it might cause critical issues like the blue screen. Use these instructions to repair the master boot record (MBR).
- Insert the Windows DVD/CD/USB into the drive. Then, use it to start your computer.
- Select the language and area, and then click Repair Your Computer.
- Select Command Prompt.
- Type the following lines of code into the Command Prompt and press Enter after each one. bootrec /fixmbr bootrec /fixboot bootrec /scanos bootrec /rebuildbcd
Close the Command Prompt window and reboot the machine. The Blue Screen of Death (BSOD) should no longer occur if the MBR were the reason.
Solution 7: Reinstall System
If none of the above solutions work, a clean installation of the operating system is your last choice.
- Insert the Windows DVD/CD/USB into the drive. Then, use it to start your computer.
- To reinstall Windows 7, choose the option to do so, then press the Install Now button and follow the on-screen instructions.
Conclusion
Windows 7 blue screen problems may arise for various causes, but fortunately, you can fix them in various ways. It depends on which method you choose. The best available solution is to get your hands on PassFab FixUWin if you want to fix this issue properly. Numerous options are available in this tool to fix the Windows 7 blue screen with cursor.